Skip to main content
Oil Tank Replacement Services logo

Our work

Recent oil tank installations

Real jobs completed by our own engineers. Follow each installation from the first groundworks or old-tank removal through to the finished bunded tank.

Book a free site survey 01673 842874
Completed black bunded oil tank installed on a purpose-built raised base
A completed raised-base installation by our OFTEC registered engineers.

Recent job 1

Raised bunded tank installation

A new slab foundation and blockwork plinth built from scratch, followed by the installation and connection of a green bunded tank.

New paving-slab foundation prepared in a garden for an oil tank installation
1The new level slab foundation, prepared before the raised plinth was built.
Two oil tank engineers constructing a raised blockwork plinth on a paved foundation
2Our engineers constructing the load-bearing blockwork plinth.
Engineer cutting the top slabs while finishing a raised oil tank base
3Finishing and levelling the top slabs before the tank is positioned.
Completed green bunded oil tank installed on a raised block and slab base
4The completed bunded tank installation on its purpose-built raised base.

Recent job 2

Before and after: tank replacement

The old tank was emptied and disconnected before a new bunded tank was installed on a larger, compliant slab base.

Engineers pumping oil from an old tank before disconnecting and removing it
1Before: recovering the remaining oil and disconnecting the old tank.
New green bunded replacement oil tank installed on a level paving-slab base
2After: the new bunded tank positioned on its completed compliant base.

Recent job 3

Garden installation on a new slab base

A complete groundworks sequence, from excavating and levelling the new position to laying the slabs and installing the bunded tank.

Oil tank engineers excavating a new tank position in a garden
1Excavating the new position and checking the available space.
Engineers levelling the sub-base for a new domestic oil tank
2Levelling and compacting the ground before the slabs are laid.
Engineer laying concrete paving slabs for a new oil tank base
3Laying each slab onto the prepared sub-base and checking the level.
Completed level paving-slab base ready for a bunded oil tank
4The completed continuous base, ready for the new tank.
Green bunded domestic oil tank installed on a new garden slab base
5The new bunded tank installed and connected on the finished base.

Recent job 4

Raised plinth tank installation

A six-stage installation showing the cleared site, compacted sub-base, slab foundation, blockwork plinth and completed black bunded tank.

Garden site cleared and marked out for a new raised oil tank installation
1The site cleared and prepared for the new foundation.
Engineer compacting the aggregate sub-base for a new oil tank foundation
2Compacting the aggregate sub-base to prevent settlement.
Engineers laying concrete slabs on a prepared oil tank sub-base
3Laying and levelling the continuous slab foundation.
Engineers building a raised blockwork plinth for a domestic oil tank
4Building the blockwork supports for the raised tank position.
Black bunded oil tank installed on a completed raised blockwork base
5The new tank installed securely on the completed raised base.
Wide view of a completed black bunded oil tank installation in a garden
6The finished installation, positioned neatly at the edge of the garden.

Get a free, no-obligation site survey

An OFTEC registered engineer will inspect your tank, base and oil line, then give you a fixed written quote for the whole job. The survey costs you nothing and you are under no obligation to book the work.

Request your free quote 01673 842874